Roll over image to zoom in

AMBRO-SOL P301 SPRAY SILICONE SEALANT REMOVER 400ML

Item No: 0243774
This spray works perfectly with fresh silicone and with hardened silicone. It removes silicone and its residuals without ruining the surface. This is another amazing product included in the Ambro-Sol “Cleaning” line                                     

SILICONE SEALANT REMOVER – Mix of solvents, designed to remove
excess silicone or silicone scraps. The product acts more quickly in the
presence of fresh silicone than it does in the presence of hardened silicone. When large amounts of silicone need to be removed, begin by removing as much silicone as possible. Afterwards, apply the solvent. It
does not corrode or tarnish any surface.
In stock

Similar Products

BISON SILICONE REMOVER 100ML
0047978
€ 6,99
HG SILICON SEAL REMOVER 100ML
0036598
€ 8,79
BISON SILICONE MULTI TOOL
0113162
€ 4,99
SENFINECO SILICONE SPRAY (9990) 450ML
0232501
€ 5,29
MOTIP SILICONE SPRAY 400ML
0025654
€ 5,89
CRC SILICONE FPS SPRAY 500ML
0199403
€ 10,99
PENTART SILICONE OIL 20 ML
0229782
€ 2,99
ARMOR ALL FLEXY BLADE SILICONE
-15%
ARMOR ALL FLEXY BLADE SILICONE
0226902
€ 6,37
€ 7.49

You may also like

SIKA SANISIL SILICONE WHITE 300ML
0232008
€ 5,29
VITEX ACRYLIC WHITE PUTTY 400GR
0229671
€ 2,29
CYCLOPS SILICONE SPONGE ROUND 50GR 5 ASSORTED COLORS
0247923
€ 1,19
POWERLINK ACCESSORIES 13A SP 2-GANG SWITCHED SOCKET WITH DUAL USB CHARGER TYPE-A & TYPE-C WHITE
0251940
€ 22,99
QUILOSA MOULD RESISTAND SANITARY SILICONE FOR KITCHEN AND BATHROOM TRANSPARENT 280ML
0193777
€ 5,99
BISON SILICONE REMOVER 100ML
0047978
€ 6,99
HG SILICON SEAL REMOVER 100ML
0036598
€ 8,79
BISON SILICONE MULTI TOOL
0113162
€ 4,99
Technical Specifications:
Barcode EAN: 8034108890319
Quantity 400 ml
Box / Case 12 Pz.
Aspect Tin-Plate can containing under pressure fluid
Color Light white
Odour Characteristic of solvent
Relative density at 20°C 0,68 ÷ 0,72 g/ml
Flash point Und. 0° C extremely flammable
Pressure at 20°C 4/6 bar
Water solubility insoluble
Solvent solubility Total
Viscosity at 100°C 3,8 cSt (dry residue)
Melting point 52-62°C ( dry residue )
Penetration test <= 30 dmm (25°C) ( dry residue )
Observations Product with gel technology, it doesn’t drip.
SILICONE SEALANT REMOVER – Mix of solvents, designed to remove
excess silicone or silicone scraps. The product acts more quickly in the
presence of fresh silicone than it does in the presence of hardened silicone. When large amounts of silicone need to be removed, begin by removing as much silicone as possible. Afterwards, apply the solvent. It
does not corrode or tarnish any surface.
Silicone Sealant Remover 400 ml (P301)
HOW TO USE: On Fresh silicone: Shake well before use and spray on the surface from a distance of about 15 cm, leave to act for a few
minutes and then clean with a cloth or scrapping tool.
Hardened silicone: Scrape the biggest section carefully with a blade or putty knife. Shake well before use and spray the surface from a
distance of about 15 cm and leave the product to act for a few minutes. Remove with a rag or scrapping tool Repeat the operation if
necessary.
MODALITY OF STORAGE
Before using: stock the product in a dry location and don’t stock it with a temperature under 0°C and over 45°C, after the use, keep containers closed. In the original
package, the product can be conserved for 24 months (warranty). The product doesn’t expire.
After the first usage: conserve in a fresh and dry location, away from hot spring. Keep out of reach of children.
Brand Ambrosol
Barcode 8034108890319
SupplierItemNumber 29.150021
Category Sealants
Capacity 400ml
On Offer No
<