Roll over image to zoom in

HG STOVE GLASS CLEANER 500ML

Item No: 0131097
•HG Stove glass cleaner cleans all stubborn dirt quickly and effectively, including soot, grease and tar from the panes of stoves and fireplaces
•For use on the glass surfaces of stoves and hearths
•Also suitable for the removal of soot from bricks
•Cleans any stove window quickly and easily
•Spray wood burner glass cleaner on the stove windows. Leave the stove glass cleaner to work for 3 to 5 minutes and then wipe off with a damp sponge
In stock
HG stove glass cleaner 500 ml – a foam stove window cleaner for the easy removal of soot, grease and tar.

HG ""stove glass cleaner"" is a foam stove window cleaner that easily removes soot, grease and tar from glass windows in stoves, hearths and other fireplaces. It is also suitable for removing minor soot deposits from bricks and mantelpieces.

This product gets stove glass clean, quickly and easily. Just spray, leave to soak in for 3-5 minutes and wipe up. Always read the label and product information before use.

Product Safety:
This product is subject to specific safety warnings
Keep out of reach of children.
Causes severe skin burns and eye damage.
Wear protective gloves and eye protection.
If on skin: remove all contaminated clothing and rinse skin with water.
If in eyes: rinse cautiously with water for several minutes. Remove contact lenses.
Storage instructions:
Transport and store the bottle upright.

Contains a.o.:
anionic and non-ionic surfactants, phosphonates < 5%

Directions for use:
The temperature of the surface to be treated should be cold, but certainly no more than lukewarm. Press the nozzle at the front side and turn a quarter. If you have used the bottle before, remnants of the liquid may be left in the nozzle, causing it to work less well when you reuse the bottle. Before reusing the bottle, we recommend you rinse the nozzle with hot tap water, e.g. by running the water through the air holes at the side of the foam pipe. Spray HG ""stove glass cleaner"" onto the surface and leave the foam to work for 3-5 minutes before wiping off with a wet sponge. Repeat the treatment on persistent marks. Turn the nozzle a quarter backwards after use (blocking position).
Do not use on marble and other chalky natural stone, untreated aluminium and plastic surfaces. Protect the surrounding area if necessary. Avoid the liquid running onto other surfaces.
Brand HG
Barcode 8711577019242
SupplierItemNumber 8711577019242
Category Surface Care Products
On Offer No
<